CL38 Gas Regulator
Itron CL38 commercial gas regulators are constant pressure loaded, designed to handle the increased gas flows of the larger orifice sizes.
The Itron CL38 is a constant pressure loaded regulator for use where closer PSIG-to-PSIG regulation is desired than can be obtained from conventional spring-loaded regulators. Since this regulator requires an inlet pressure supply of only 1/2 PSIG above outlet pressure, this unit can be used where demand-type loading will not meet the low-pressure differential.
CL38 Commercial Regulators
The key feature of the CL38, compared to other CL series regulators, is the large 2" valve body which is designed to handle the increased gas flows of the larger orifice sizes.
The CL38 also incorporates the following advantages which, for many applications, make it a most economical substitute for a pilot-loaded regulator.
- Constant pressure loading
- Internal bleed
- Internal lower diaphragm chamber
- Light valve closing spring
- Large-diaphragm area
Connection Sizes 1½" - 3"
Max. Flow Range 50,000 SCFH
Our warehouse is located just outside of Denver Colorado. We've become the premier source for Itron's regulators in Colorado, Wyoming, Utah, Idaho, Montana, North Dakota, South Dakota, Nebraska, Kansas, New Mexico, and Oklahoma. Not familiar with Itron? Itron was formerly known as Actaris and Schlumberger.